PRODUCTThermal measuring instrument
Box type probe
Thermal conductivity is easy to measure just when placing the probe on the smooth surface of a sample.
Various measurements of the sample in block, powder and sheet are possible with PD-11N.
Insulated moisture-proof probe
PD-13N is covered the insulation film to PD-11N.
Thermal conductivity of aqueous materials and conductive materials are possible to measure with PD-13N.
Thermal conductivity is measured by being sandwiched the heater and the temperature senser with the same samples.
PD-31N is a conventional type of sensor and the thermal conductivity in higher temperature range is possible to measur…
Vessel for powder
Thermal conductivity in the bulk density* of the powder samples is possible to measure with the optional vessel for powder (with a scale). The mass of the collected sample is necessary.
*The calculation of bulk density…
Heat Flow Sensors
Various sensors are provided as below to best suit your measurement needs
Printer to print out dots with ink ribbons
Printer to print out on thermal paper
Compatibility of Main units and Options
|Vessel for powder||Yes||Yes||Yes|
Yes : Connectable and can work with
No : Not connectable nor used with
■Quick Thermal Conductivity Meter QTM-710QTM-700.pdf