QTM-710/QTM-700 can measure thermal conductivity of uniform material easily in a short time.Inquiry
Quick Thermal Conductivity Meter
・Clear and easy operation with the touch-screen of 5.7 inch color LCD
Intuitive operation is possible with touch-screen. History of measured values can be seen by pressing the display of the measurement result once, and necessary information and operation menu is displayed speedy. Result window.
・Quick measurement with 3ch probes
Solid and film can be measured continuously without changing the probe when the same type or other types of various probe are connected.
・Built-in Thin film measurement (QTM-710)
Thermal conductivity of the sheeted sample such as a film and a sheet of fiber products is possible to measure.
The result is easy to analyze since an average calculation of the measured value and rise temperature features is able to display.
- Easy data transfer with a USB flash drive
Measurement data transfer to personal computer is easy with a USB flash drive.
Data is viewable and editable in the spreadsheet software because it is saved in CSV format.
- Security function
Password setting and security level can be selected in accordance with the intended use and the environment.
- Probe is compliant with traceability.
Traceability system of the thermal conductivity standard substance (reference plate) is established for the purpose of further improvement of the reliability of the measured values
- The thermal conductivity of various samples such as block form or sheet in manufacturing, construction, handcraft, soil or food industry is possible to measure by placing a probe on the surface of sample with the uniform temperature.
・Thermal insulating material of fiber or foamed plastic
・Plastic, Glass, Wood, etc.
・Sheet, Leather, etc.
・Bread dough, Mashed food, Powder, etc.
・High heat insulation material, Ceramics, etc.
|Quick Thermal Conductivity Meter
|QTM-710 / QTM-700
|Hot Wire Method
|Within ±5% reading value per reference plate*2 (room temp. only)
|3% (at the measurement of reference plate)
|Thin film measurement
|QTM-710 : Able
QTM-700 : Unable
|5.7 inch color LCD
|English / Japanese / Chinese / Korean
|RS232C : 2ch (Printer, Data Acquisition Software)
USB : 2ch (Printer, USB flash drive)
|Temperature : 5 to 35℃
Humidity : 85%RH or below (no condensation)
|DC24V 5A (main unit), AC100-240V±10% 50/60Hz (AC adaptor)
|CE marking (EN61326-1, EN61010-1), suitable for RoHS
Measurement accuracy and repeatability of Thin film measurement depends on the state of the sample
Reference plate (Quartz glass / Silicone rubber / Polyethylene foam)
Box type probe
Thermal conductivity is easy to measure just when placing the probe on the smooth surface of a sample.
Various measurements of the sample in block, powder and sheet are possible with PD-11N.
Insulated moisture-proof probe
PD-13N is covered the insulation film to PD-11N.
Thermal conductivity of aqueous materials and conductive materials are possible to measure with PD-13N.
Thermal conductivity is measured by being sandwiched the heater and the temperature senser with the same samples.
PD-31N is a conventional type of sensor and the thermal conductivity in higher temperature range is possible to measure with PD-31N.
Vessel for powder
Thermal conductivity in the bulk density* of the powder samples is possible to measure with the optional vessel for powder (with a scale). The mass of the collected sample is necessary.
*The calculation of bulk density is required the mass of the sample.
Printer to print out dots with ink ribbons
Printer to print out on thermal paper
■Quick Thermal Conductivity Meter QTM-710QTM-700.pdf